P14 1/2″-12″ I Style Water Hammer Arrestor

P14 Series Water Hammer Arrestors

The P14 AIT AIF series water hammer arrestors are a well proven diaphragm type design from Z Tide. The compression chamber is filled with compressed air in order to absorbs the shock of the water. The air chamber can be monitored by the external gauge allowing for maintenance and longevity of the arrestor.

  • Installation in any position
  • Suitable for water, air etc
  • Special model for acid/alkaline or light oils
  • Rechargeable air chamber for long life operation
  • Body materials: Bronze (1/2”-4” screwed, 3”-12” flanged)
  • Body materials: Ductile Iron (3”-12” flanged)
  • Body materials: 304 Stainless Steel (½”-4” screwed, 3”-12” flanged)

The P14 AIT AIF series water hammer arrestor is a rugged and robust industrial water hammer arrestor. Internal seals are either NBR or VITON. A pressure gauge is fitted on flanged models in order to check the pressure of the air chamber. The replacement of the internal diaphragm is very quickly achieved on site. Contact us for service kits and advice.

Data Sheet

Learn more about how to install water hammer arrestors in the optimum position and tune for best efficiency...

Water Hammer Arrestor Optimisation

Not sure which valve or measurement solution is best?
Use our experience to guide you...

For a deeper understanding of which valve or instrument would be best for you please call or email us now so that we can save you time and ensure you can make a truly objective decision for your company.

Contact Us

Get in Touch

+44 (0) 1443 772500 / 02922 780798

Red Dragon Limited T/A
Measure Monitor Control
Unit 15 Abergorki Industrial
Ynyswen Road
South Wales
CF42 6DL
United Kingdom
EORI: GB791056521000

Got a Question?

Need assistance with a product or an enquiry? Fill in the form below and we will get in touch with you as soon as possible:

The contact form requires that you configure reCAPTCHA in the site configuration.

The contact form requires that you select an email template.