S230 & S231 Dew Point Sensors

S230 & S231 Dew Point Sensors

S 230 and S 231 dew point sensors use a new dual sensor technology to deliver accurate performance over a wider measuring range than normally achievable with a single sensor.

These instruments were designed to operate in all industrial environments with IP67 ingress protection and options for ATEX, IECEx or GB3836 certification for hazardous area duty.

Process connection is though a standard G1/2″ male thread and communication methods include both 4-20mA and Modbus RS485 to interface directly with plant control systems.

  • Range -100degC to +20degC S230
  • Range -50degC to +20degC S231
  • Pressure range -0.1 to 1.6MPa (S230) 5.0MPa (S231)
  • Output 4-20mA or Modbus RTU
  • Power supply 12-30Vdc 40mA
  • ATEX, IECEx or GB3836 options

The compact dimensions allow easy installation of S230 or S231 sensors in confined spaces and parameters can be changed using the SUTO service software.

Data Sheet

Not sure which valve or measurement solution is best?
Use our experience to guide you...

For a deeper understanding of which valve or instrument would be best for you please call or email us now so that we can save you time and ensure you can make a truly objective decision for your company.

Contact Us

Get in Touch

+44 (0) 1443 772500 / 02922 780798

Red Dragon Limited T/A
Measure Monitor Control
Unit 15 Abergorki Industrial
Estate
Ynyswen Road
Treorchy
South Wales
CF42 6DL
United Kingdom
EORI: GB791056521000

Got a Question?

Need assistance with a product or an enquiry? Fill in the form below and we will get in touch with you as soon as possible:

The contact form requires that you configure reCAPTCHA in the site configuration.

The contact form requires that you select an email template.