Self-contained Dew Point Monitoring From Only £570!

The S 305 dew point monitor offers 24/7 monitoring of compressed air dew point with 2 programmable alarm relay outputs from an IP65 wall mounted enclosure with LCD display and integral sensor.

Installation is simple: mount the case on the wall, connect the power supply cable (100…240Vac or 24Vdc depending on model) and connect the air line through the 6mm push-fit connector. Ready to monitor in minutes and if you want to expand the user visual alarm capability with external sounders, buzzers or beacons, another cable or two into the box and you’re all set. The S 305 can be supplied ready to install with a beacon already mounted for even easier installation. The standard 4-20mA output can be used to feed instantaneous dew point readings to external controllers or SCADA systems.

Available with 2 dew point ranges to suit refrigerant or desiccant dryer based systems, the S 305 offers incredible value for money for dew point verification and alarm triggering requirements. There is even a 4-20mA input for an external pressure sensor if required.

More details

Not sure which valve or measurement solution is best?
Use our experience to guide you...

For a deeper understanding of which valve or instrument would be best for you please call or email us now so that we can save you time and ensure you can make a truly objective decision for your company.

Contact Us

Get in Touch

+44 (0) 1443 772500 / 02922 780798

Red Dragon Limited T/A
Measure Monitor Control
Unit 15 Abergorki Industrial
Estate
Ynyswen Road
Treorchy
South Wales
CF42 6DL
United Kingdom
EORI: GB791056521000

Got a Question?

Need assistance with a product or an enquiry? Fill in the form below and we will get in touch with you as soon as possible:

The contact form requires that you configure reCAPTCHA in the site configuration.

The contact form requires that you select an email template.