F63 3/8″ & 1/2″ 3/2 Manual Reset E Type Solenoid Valve IP65 IP67 Exd

F63 Series Solenoid Valve

F series three way manual reset solenoid valves are normally used as safety pilot devices for single-acting actuators. The F series can only change from the ‘Reset’ to ‘Work’ condition by operating the latching device manually.

‘E’ Type Operation:

Spool of the valve is manually latched to the ‘work’ condition with the coil de-energised. By energising the coil, the spool will unlatch and the valve will return to the ‘rest’ position.

The F63 series are manufactured by Nadi Srl in Italy and offer reliable operation in a compact valve format. They are available in brass or stainless steel bodies with either 3/8″ or 1/2″ BSP or NPT threads and suitable for gaseous media. Contact us for details of model F01 which is suitable for liquid media.

  • Pressure range: 0-14bar
  • Brass or 316 stainless steel bodies
  • 3/8″ or 1/2″ BSP or NPT ports
  • Coils to suit all common voltages. 12, 24, 48, 110, 220VAC or DC
  • Special voltages upon request
  • 3 different elastomer choices: HNBR, NBR & VITON
  • IP65, IP67 & ATEX Ex d

The F63 is ideally suited for process automation control in both safe areas and hazardous area locations. High dependency actuator control for pneumatic applications, together with compact dimensions, allows the F63 to be used in the most demanding of installations. Service and overhaul kits are available for this model. Contact us for further details.

Data Sheet

Not sure which valve or measurement solution is best?
Use our experience to guide you...

For a deeper understanding of which valve or instrument would be best for you please call or email us now so that we can save you time and ensure you can make a truly objective decision for your company.

Contact Us

Get in Touch

+44 (0) 1443 772500

Red Dragon Limited T/A
Measure Monitor Control
Unit 15 Abergorki Industrial
Estate
Ynyswen Road
Treorchy
South Wales
CF42 6DL
United Kingdom

Got a Question?

Need assistance with a product or an enquiry? Fill in the form below and we will get in touch with you as soon as possible:

The contact form requires that you configure reCAPTCHA in the site configuration.


Measure Monitor Control is an independent specialist distributor of valve and instrument solutions. We are dedicated to providing high quality innovative solutions working with a global supply chain to provide the ideal specification for the client, on time and on budget.

Get in Touch

+44 (0) 1443 772500

Red Dragon Limited T/A
Measure Monitor Control
Unit 15 Abergorki Industrial
Estate
Ynyswen Road
Treorchy
South Wales
CF42 6DL
United Kingdom

GDPR | Legal | Privacy

Copyright © 2018 - Measure Monitor Control - All Rights Reserved.