L65 3/8″-2″ 2/2 NC 0.2-25bar IP65 IP67 Exd

L65 Series Solenoid Valve

The L65 series two way normally closed solenoid valves manufactured by Nadi Srl in Italy offer reliable operation in a compact valve format. They are available in brass bodies with port sizes from 3/8″ to 2″. 316 stainless steel bodies in sizes 1/2″ & 3/4″. Flanged ANSI 150 or ANSI 300 are available with stainless steel bodies. With a large internal orifice, the L65 series can acommodate high flow gas or liquid media.

  • Pressure range up to 25bar (/AP model)
  • Brass bodies 3/8″ to 2″
  • 316 stainless steel bodies 1/2″ & 3/4″. ANSI 150 & ANSI 300 flange option
  • 3/8″-2″ BSP or NPT ports
  • Special sub base model: go to… L65T18U1B
  • Coils to suit all common voltages. 12, 24, 48, 110, 220VAC or DC
  • Special voltages upon request
  • 4 different elastomer choices: EPDM*, HNBR, NBR & VITON
  • *EPDM seals are FDA approved for the 3/8" & 1/2" model
  • Manual override option
  • IP65, IP67 & ATEX Exd

The L65 is ideally suited for process automation control and safety interlock systems due to the wide pressure and flow capability and compact dimensions. The 3/8" and 1/2" L65 has FDA approved seals for drinking water. The L65 can be serviced on site with overhaul kits available from us. Ask us for special options and custom models.

Data Sheet

Not sure which valve or measurement solution is best?
Use our experience to guide you...

For a deeper understanding of which valve or instrument would be best for you please call or email us now so that we can save you time and ensure you can make a truly objective decision for your company.

Contact Us

Get in Touch

+44 (0) 1443 772500 / 02922 780798

Red Dragon Limited T/A
Measure Monitor Control
Unit 15 Abergorki Industrial
Estate
Ynyswen Road
Treorchy
South Wales
CF42 6DL
United Kingdom
EORI: GB791056521000

Got a Question?

Need assistance with a product or an enquiry? Fill in the form below and we will get in touch with you as soon as possible:

The contact form requires that you configure reCAPTCHA in the site configuration.

The contact form requires that you select an email template.