S130 Series Particle Concentration Sensors

S130 & S132 Laser Particle Counters

The S130 range of particle concentration sensors offers different particle size ranges from 0.3 microns with the S130 and 0.1 microns for the S131 or S132. Either model is available with or without the touchscreen display and datalogger.

The S130 series in standard form is designed to interface directly with systems such as data loggers and control systems through 4-20mA, RS-485 Modbus/RTU, SDI and is designed to offer 24/7 monitoring or periodic testing according to the requirements of ISO 8573-4.

  • Particle size ranges from 0.1 microns
  • Pressure range 0.3 to 0.8MPa
  • Output 4-20mA, RS485 Mobus/RTU, SDI. Relay
  • Power supply 24Vdc 5W
  • Inlet connector 6mm Push Fit

S130 or S132 can also be employed as a standalone test/monitoring solution when specified with the optional 5″ colour LCD touchscreen display. This version integrates data logging with graphical display and menu driven controls to provide an easy and effective way to evaluate particle contamination directly for point of use audits or continuous monitoring where operators need visibility of contamination levels.

Note that the model S131 has been replaced by the S132 model in July 2019, which employs a next generation particle sensor for accurate measurement down to 0.1 microns.

Data Sheet

Not sure which valve or measurement solution is best?
Use our experience to guide you...

For a deeper understanding of which valve or instrument would be best for you please call or email us now so that we can save you time and ensure you can make a truly objective decision for your company.

Contact Us

Get in Touch

+44 (0) 1443 772500 / 02922 780798

Red Dragon Limited T/A
Measure Monitor Control
Unit 15 Abergorki Industrial
Ynyswen Road
South Wales
CF42 6DL
United Kingdom
EORI: GB791056521000

Got a Question?

Need assistance with a product or an enquiry? Fill in the form below and we will get in touch with you as soon as possible:

The contact form requires that you configure reCAPTCHA in the site configuration.

The contact form requires that you select an email template.