Hassle and doubt free EN12021 testing for breathing air is now here

SUTO-iTEC GmbH have announced a pair of new breathing air testers for EN 12021 monitoring that follow on from the success of their S600/S601 instruments for compressed air analysis. The S605 is the portable breathing air tester and the S606 is the wall mounted continuous breathing air analyser. Both instruments use the same internal sensors to provide measurement of oxygen (O2), carbon dioxide (CO2) and carbon monoxide (CO) in addition to dew point, oil vapour and pressure.

These instruments have dedicated touchscreen displays and integral data loggers and both provide after-test PDF reports for printing or emailing to clients. Since all the sensors are internal, there's no longer a need to use multiple devices or suffer the inaccuracy of chemical indicator tubes and their attendant safety hazards.

The S605 and S606 provide a new option for comprehensive and reliable breathing air testing with ease of use and repeatable measurements comparing well against traditional solutions. Plug in, switch, on and get a PDF report at the end of the test. No mess. No fuss. No problems.

Not sure which valve or measurement solution is best?
Use our experience to guide you...

For a deeper understanding of which valve or instrument would be best for you please call or email us now so that we can save you time and ensure you can make a truly objective decision for your company.

Contact Us

Get in Touch

+44 (0) 1443 772500 / 02922 780798

Red Dragon Limited T/A
Measure Monitor Control
Unit 15 Abergorki Industrial
Ynyswen Road
South Wales
CF42 6DL
United Kingdom
EORI: GB791056521000

Got a Question?

Need assistance with a product or an enquiry? Fill in the form below and we will get in touch with you as soon as possible:

The contact form requires that you configure reCAPTCHA in the site configuration.

The contact form requires that you select an email template.