High Flow Pressure Regulator Models D56, 2126 & 3126: DN80 & DN100

Model D56: R126 DN80 or DN100 Brass Regulator

Model 2126: R126LL DN80 or DN100 Aluminium Regulator

Model R3126 DN80 or DN100 Stainless Steel Regulator

Model D56: R126 DN80 or DN100 Brass Pressure Regulator

The model D56: R126 range of brass pressure regulators from ID Insert Deal Srl are suitable for use on air, gas or liquids for pressures up to 30bar. The regulator uses a balanced valve and diaphragm design for accurate pressure control up to 15bar. Handwheel or pilot operated versions are available. This regulator is available in DN80 or DN100 flange sizes, with 1/4" inlet and outlet gauge ports. This regulator complies with PED and can be supplied with EAC-EX certification for hazardous area duty.

Model 2126: R126LL DN80 or DN100 Aluminium Pressure Regulator

The model 2126: R126LL range of aluminium pressure regulators from ID Insert Deal Srl are suitable for use on air or gases for pressures up to 20bar. The regulator uses a balanced valve and diaphragm design for accurate pressure control up to 15bar. Handwheel or pilot operated versions are available. This regulator is available in DN80 or DN100 flange sizes, with 1/4" inlet and outlet gauge ports. This regulator complies with PED and can be supplied with EAC-EX certification for hazardous area duty.

Model 3126: R3126 DN80 or DN100 Stainless Steel Pressure Regulator

The model 3126: R3126 range of stainless steel pressure regulators from ID Insert Deal Srl are suitable for use on air, gas or liquids for pressures up to 30bar. The regulator uses a balanced valve and diaphragm design for accurate pressure control up to 15bar. Handwheel or pilot operated versions are available. This regulator is available in DN80 or DN100 flange sizes, with 1/4" inlet and outlet gauge ports. This regulator complies with PED and can be supplied with ATEX or EAC-EX certification for hazardous area duty.

Not sure which valve or measurement solution is best?
Use our experience to guide you...

For a deeper understanding of which valve or instrument would be best for you please call or email us now so that we can save you time and ensure you can make a truly objective decision for your company.

Contact Us

Get in Touch

+44 (0) 1443 772500 / 02922 780798

Red Dragon Limited T/A
Measure Monitor Control
Unit 15 Abergorki Industrial
Estate
Ynyswen Road
Treorchy
South Wales
CF42 6DL
United Kingdom
EORI: GB791056521000

Got a Question?

Need assistance with a product or an enquiry? Fill in the form below and we will get in touch with you as soon as possible:

The contact form requires that you configure reCAPTCHA in the site configuration.

The contact form requires that you select an email template.