Filters for Compressed Air, Gas and Liquids

Filters protect pressure regulators and other valves from damage or reduced efficiency due to a build up of particle or liquid contaminants. Compressed air and gas pipes can convey rust scale, dirt and other particles from elsewhere in the systems and filter stages remove these from the gas, especially where the gas may then come into contact with product that must not be contaminated. Compressed air systems also require the removal of water from the air stream and this must be periodically bled from the filter bowl. Coalescent Filters are used as a second stage to remove finer contaminants down to 0.01 microns and must be protected by a coarser pre-filter to prevent premature failure.

High Pressure Filtration up to 300bar

3/8" 220bar Inline Filter Model FHPL

1/4", 3/8", 1/2" Filter Models 2B1 & 2B3

3/4" & 1" Filter Models 110F1 & 310F1

Medium Pressure Filtration up to 50bar

1/8" & 1/4" Filter Models 241, 215 & 243

1/4", 3/8" & 1/2" Filter Models 231, 212, 233, 312F2

1/4", 3/8", 1/2", 3/4", 1", 1.25" & 1.5" Coalescing Filter FC2S

3/4", 1", 1.25" & 1.5" Filter Models 110F2, 210F2, 310F2

1.5" & 2" Filter Models 120F2, 220F2, 320F2

Out of production models for information only

Filter Models 251, 212, F320 are no longer available. Replaced by 120F2, 220F2 & 320F2

Not sure which valve or measurement solution is best?
Use our experience to guide you...

For a deeper understanding of which valve or instrument would be best for you please call or email us now so that we can save you time and ensure you can make a truly objective decision for your company.

Contact Us

Get in Touch

+44 (0) 1443 772500 / 02922 780798

Red Dragon Limited T/A
Measure Monitor Control
Unit 15 Abergorki Industrial
Ynyswen Road
South Wales
CF42 6DL
United Kingdom
EORI: GB791056521000

Got a Question?

Need assistance with a product or an enquiry? Fill in the form below and we will get in touch with you as soon as possible:

The contact form requires that you configure reCAPTCHA in the site configuration.

The contact form requires that you select an email template.